Brushless Alternator 60Hz 10kVA - 1650kVA for Generator Set

Brushless Alternator 60Hz 10kVA - 1650kVA for Generator Set

FRAME
All industrial standard alternator is IP21(NEMA1), also IP 23 is an option, But rated power will decrease 5%.
Marine standard brushless alternators is IP23. Air filter is an option, but rated power of the alternator will decrease 5% while it is installed.

AXIS AND KEY
All of the AC alternator rotors should pass balance test, whose vibrations are lower than the minimum of BS6861 P.1 G 2.5 two bearing alternator has a half-key testing balance.

TERMINAL AND TERMINAL BOX
The three phase generator has 12 leads brought out to the terminals in terminal box. The terminal are put on the non drive end. The box is equipped with removable panels.

ENGINE ADAPTOR AND COUPLING
A. New ASF series brushless generator have two kinds construction.
B. NEW ASF series single-bearing brushless generator, engine adaptor to SAE00,0,1,2,3,4,5 and 6 coupling discs to SAE 6.5, 7.5, 8, 10, 11.5, 14,18, 21 and 24 are available.
C. New ASF series double-bearing alternator, engine adaptor to SAE0,1,2,3,4 and 5 are available.

VOLTAGE REGULATION
Voltage regulation refers to the change of voltage from no-load to full-load with power factor ranging from 0.8 to 1 and 3%`s fluctuation of the speed of engine. Voltage is adjusted via potentiometer of AVR.

Electric Features
A. Insulation Class H
All regulatory components are made up with special materials and are immersed in lacquer by peculiar tech. Vanish and colophony materials are develop to strengthen the processing and machinery intensity of windings and revolving parts for protecting the alternator work under corrosive environment.

B. Winding and electric features
2/3 pith winding design can effectively eliminate the third harmonic wave(3th.9th,15th) of the voltage ,which is the best design of UPS for nonlinear load .Connected with the network in parallel, the structure can restrain excessive currents in the midline. This and the 2/3 pitch help to check the wave distortion and output voltage.

C. Phone interference and Radio interference
THF (defined by 40thpart of BS4999) <2%.TIF<50
Brushless apparatus and quality AVR ensure little radio interfe